Boom barriers
Boom barriers (also known as boom gates), can be conceived of as gates which instead of opening in the horizontal plane, operate by rising and falling. They are typically pivoted on one side and counter weighted to allow smooth, easy manual operation. They can also be motorised and are usually painted in conspicuous colours such as with alternating red and white bands. To further increase their visibility, a second arm can be suspended around 300-400mm below the main arm by metalstraps which gradually revert to the vertical position as the boom is raised.
[edit] Related articles on Designing Buildings
- Access control.
- Access to construction sites.
- Approved document Q.
- Barriers
- CCTV.
- Collective restraint systems.
- Commercial security systems.
- Cycling lane.
- Entry control.
- Fence.
- Hostile architecture.
- Palisade.
- Portcullis.
- Purchasing security gates and barriers.
- Ram raid.
- Scarp.
- Security and the built environment.
- Security glazing.
- Talus.
- Three key ingredients for designing inclusive walking and cycling infrastructure
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Construction Management, 17 June
Government rolls out digital planning tool to all local authorities.
Your views needed - a strategy for the professions, trades and occupations.
Confronting competency, codes, capacity and costs.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.